Monday, May 11, 2015

Fort Cronkhite Loop Trail, Marin Headlands

Rodeo Lagoon is one of my favorite spots on the central California coast. This past February, we took advantage of some remarkably dry weather to hit the trails in the Marin Headlands. It was Super Bowl Sunday and we enjoyed a late afternoon ridge hike and practically had the place to ourselves!

Here is a nice view of the Wolf Ridge high above Fort Chronkhite from the parking lot at Rodeo Beach. We took a 5.2 mile loop hike which traverses a portion of the ridge.


The hike starts at Rodeo Beach, one of my favorite spots in the Marin Headlands.


A few surfers jockeyed for waves at the north end of the beach. The surf was pretty calm and it looked like a nice day to be out in the water.


A couple hundred feet up the trail you can look back down on the lagoon and beach. This is one of my favorite views in the bay area. I don't know why - it just is.


After a few more minutes of hiking, we came upon the Battery Townsley, constructed in 1938. Park Service volunteers were conducting tours and a very friendly lady gave us the last tour of the day through the tunnels buried in the hillside. During WWII, this entire installation would have been carefully camouflaged to hide it from spying eyes.


A little bit higher up the ridge we got an even better view of the beach, looking over towards Point Bonita, with San Francisco in the background. Sutro Tower is visible on the ridge in the background (in my neighborhood!), with the hills around Pacifica (Montara Mountain and Point San Pedro) stretching out to the south.


This is the site of the massive 68-foot long artillery gun mounted in the hillside at Battery Townsley. With a range of 25 miles, the idea was that you could triangulate on an enemy warship, project its speed and trajectory, and hit the target within three shots. Seems kind of improbable to me, but the Park Service volunteer assured us that the crew was quite capable.


Here's a photo of a gun similar to that mounted at Battery Townsley.


We saw a few folks up on the trail but we mostly had the ridge to ourselves since it was close to sunset. This is the view looking north towards Tennessee Valley.


There is a paved trail at the top of the ridge that takes you up to Hill 88 (elevation 988 ft), which has a history as a radar site for nearby Nike missile installations.


There are quite a few abandoned buildings at the top of the hill. This one provides a view of Ocean Beach in San Francisco, through the window.


Once on top of the ridge, we found sweeping views of the Pacific Ocean to our west.


Looking west along the ridge at sunset. It was a beautiful day to be up in the Marin Headlands.


This is the view coming down from Hill 88. You have to backtrack just a little bit to pick up the rest of the Wolf Ridge trail, which drops down on the backside of the ridge and then joins the Miwok trail to loop back around to Rodeo Lagoon.


We got a late start and took an unexpected tour of Battery Townsley so we ended up hiking down the road back to the car in the dark. It was worth it though!


Tuesday, January 13, 2015

Is your home in a coastal floodplain?

After years of talking with community members, residents, and vacationers that live along or visit the coastline, there seems to be a general lack of knowledge on topics such as vulnerability to coastal flooding, erosion hazards, and impacts of climate change on coastal environments. That's understandable - these are complex topics! But what about the most fundamental question of all: "Am I located in a coastal floodplain?". If you are a homeowner, you likely know the answer to this question because if you are in a flood hazard area, your mortgage lender may require you to purchase flood insurance. But maybe you are a renter or just visiting the coast - having dinner at your favorite restaurant known for its great ocean views or you've rented a beach house for a week in the summer. This proximity to the ocean sure is nice but maintaining this infrastructure in the coastal floodplain can be risky business.

Today's post on the California Beach Blog will show you how to search for and view the coastal floodplain mapping at any location you are interested in. Let's get started!

Since the 1970s, the federal government has produced flood maps through the National Flood Insurance Program (NFIP), administered by the Federal Emergency Management Agency (FEMA). According the FEMA's website, "The NFIP offers flood insurance to homeowners, renters, and business owners if their community participates in the NFIP. Participating communities agree to adopt and enforce ordinances that meet or exceed FEMA requirements to reduce the risk of flooding." The purpose of the NFIP is to encourage smart building practices in flood-prone areas. Some may argue that by providing insurance to homeowners in high risk areas, the NFIP has actually enabled development of otherwise too risky areas, but that's a debate for another day. Today I'm going to show you how to download a FEMA Flood Insurance Rate Map (FIRM) for your area and give you the basic information necessary to interpret it.

The first step is to go to FEMA's Map Service Center. You can google "FEMA map service center" or browse to https://msc.fema.gov/portal. Once you're there, enter your location. You can type in an address, place, or lat/lon coordinates. Here, I'm searching for "Capitola, CA".

Type in your location of interest in the search box
Hit the "Search" button and the website brings up a viewer showing your location (Capitola, CA in Santa Cruz County). The website automatically highlights the map panel that contains Capitola, but you can also use the zoom buttons and pan around with the mouse to find your location if it is outside of the highlighted area.

The website pre-selects the panel that contains the location you searched for.

For example, if I'm interested in the waterfront area at Capitola Beach near the Soquel River mouth, I could zoom in just to make sure it is contained in the highlighted area. If not, you can click on the map and the website will reselect the map panel. Here, I've clicked on the beach area.

If the default selection does not contain the location you are looking for you can browse to the correct location, click on the map, and the website will reselect the appropriate map panel.

The next step is to either view the map online or to download the map and view it on your computer. I've found the online viewer to be pretty clunky; however, if you download the map file they can be quite large (this particular panel is about 70 MB). If you only have to view one map, it's probably worth downloading it. If you are going to view a bunch, you may prefer to just view them online.

Once you have the correct map panel selected, you can either view the map online or download the map.

The download file comes down as a zip file, so you will have to unzip it first to get to the image file (a PNG file). If you view the map online, the viewer will open in a new window. I suggest maximizing your browser window and then using the zoom tool to zoom in so you can see the map better. Here, I've drawn a zoom box around the beach and river mouth area.

You can zoom in to your area of interest. Here, I'm zooming in to the Capitola Beach area.
Once you zoom in to the right level, you can really start to see some of the information and labels for your area of interest. Here, I've enlarged the boxed area from above. There are a few key labels to note, which I'll explain in more detail below. First, the areas shaded in blue or black are areas that are in FEMA's Special Flood Hazard Area. If you aren't in a blue or black area, it doesn't mean that you have no risk of flooding, it just means that you are not mapped in FEMA's regulatory floodplain. The second level of information are the labels "Zone AE" and "Zone VE". These designations tell you the type of flood hazard in each area. Finally, the numbers on the map (17, 19, 20, 22, etc) indicate what is called the "Base Flood Elevation", which is the elevation of the floodwaters associated with FEMA's regulatory storm of choice - the 100-year or "1-percent-annual-chance" flood.


So now for some more detail:

  • Special Flood Hazard Area - The blue and black shaded areas are "in" the floodplain. The blue areas are subject to flooding during a 100-year storm and the black areas are subject to flooding during a 500-year storm. I'm using the common terminology for FEMA's design storm (the "100-year flood") but technically the "1-percent-annual-chance" storm is the more correct term. The difference in terminology is because the 100-year storm is not a storm that happens only once every one hundred years. Instead, it is a storm event that has a 1% chance of occurrence in any given year. That may sound low, but due to the effects of cumulative probability, the chance of experiencing a 100-year flood over a time period of 30 years is roughly 25% (see my post on Encounter Probability for more information).  And finally, just for the record, if you are mapped in the 500-year floodplain, you are still vulnerable to flooding and may want to consider purchasing flood insurance! Ask anyone who survived Hurricanes Katrina or Sandy, both of which were more severe than a 100-year event...
  • Zone Designations - Fortunately, this map only has two zone designations - Zone AE and Zone VE. The "V" in VE indicates a high velocity zone, either due to strong currents or wave action. The AE zone indicates inundation only (or inundation with small waves). The "E" indicates that the area has an assigned Base Flood Elevation (or BFE, see next bullet). There are other areas (like to the east of Capitola) that have either a generic "V" Zone or "A" Zone. In these areas, the flood hazard area is shown on the map but there is no published flood elevation, so less information is available. Other designations exist (for example, zones which indicate depth of flooding but not and elevation), but the VE and AE zones are the most common.
  • Base Flood Elevations - The numbers shown on the map are key because they tell you to what elevation flood waters are predicted to rise during the 100-year flood. Elevations on newer maps are reported relative to the North American Vertical Datum of 1988 (NAVD88). Older maps typically reported elevations relative to the National Geodetic Vertical Datum of 1929 (NGVD29). Along the California coast, elevations relative to NAVD88 are typically 2.5 to 3 ft higher than in NGVD29.
If you live in an area where elevated homes were common, you would be required to elevate your home (on stilts for example) above the BFE to minimize flood damage. It is, of course, possible that flood waters will exceed this elevation during extreme events so it is up to a homeowner to decide what risk they are willing to take. In Capitola, the western portion of the beach shows a wave runup elevation of 22 ft and the eastern portion of the beach shows a wave runup elevation of 19 ft. Landward of the coastal flood hazard area, the blue shading merges with the Soquel River flood hazard area and the base flood elevations increase from 15 ft to 17 ft to 19 ft to 20 ft, etc. as you move upstream.

Along the California coastline, the base flood elevation typically represents the wave runup elevation at the shoreline. In some sheltered areas with small waves, the limit of inundation may be shown as an AE Zone only (such as Bolinas Lagoon), which indicates that the area is generally sheltered from wave action but may be subject to tidal flooding.

Let's look at a couple other examples:

Here's the inundation floodplain in Bolinas Lagoon that I mentioned above. As you can see, there is no V Zone (which would indicate the potential for damaging storm waves) and instead the Special Flood Hazard Area is shown as an AE Zone with elevation 8 ft.


Here's the coastal floodplain mapping along Beach Drive in Rio del Mar. There is a VE Zone at this location with a base flood elevation (wave runup elevation) of 24 ft. As you can see, all of the homes built along the back of the beach here are vulnerable to coastal flood damage.


So there you have it. If you want more detailed information, there is a 50-page tutorial on FEMA's website, titled How to read a flood insurance rate map but I hope I've provided enough information here to get you started. Also keep in mind that FEMA is currently updating the coastal flood maps for the entire state of California - so your map will soon change (for the better - the new maps are based on new data and state of the art analysis and mapping techniques).

Please leave a comment if you have any questions.

Sunday, November 23, 2014

November afternoon at Ocean Beach - first video

On Saturday afternoon I headed out to Ocean Beach to practice using the video functionality of my Nikon D7100. It was sunny at my house on the Panhandle but by the time I got out to the Inner Sunset it was grey and misting! I thought I saw clearing clouds to the west and sure enough by the time I got to the Great Highway it was sunny and warm, although a bit windy. The storms clouds were headed eastward and I was in for a perfect fall afternoon at the beach.

I opened my trunk to get my camera and tripod only to discover I was missing the plate that attaches the camera to the tripod! Ahhh! I guess my first video attempt was destined to be a shaky hand-held operation.

I had been experimenting with the video settings the night before and had the camera in monochrome mode. I turned the camera on and liked what I saw and the black and white colors seemed appropriate for a post-storm November outing so I left the settings as is.

I left the camera in aperture-priority mode and for the most part the camera behaved like I wanted. The focuses proved to be the trickiest aspect because it was hard to see the live display on the back of the camera due to the glare so I couldn't always tell if the image was in focus.

I tried to follow some guidance I had read online of shooting a few 10-second clips and then editing them together at the end. I tried to vary the shots - some landscape, some details, some personal.

When I got home I still didn't have a viable option for the video editor! I did a little research online and downloaded the Microsoft Movie Maker, which proved to be just the right balance of simplicity and functionality for me to stitch together the clips, add transitions, and overlay a soundtrack.

Hope you enjoy!



Ocean Beach from California Beach Blog on Vimeo.